Automatic Foil Stamping & Die-cutting Machine

Automatic Foil Stamping & Die-cutting Machine

orCall +44(0)1924 261975

Description

Servo Control,Perfect Foil Stamping


01 Feeding Positioning Section: The incline-type paper moving table top is more suitable to high-speed thin paper and location. Side location adopt dual purpose side device with pull and push, according to paper choose, it makes switch easier.It could switch front rise position arriving reduction of speed device, it is benefit of thin paper’s location.


02 The Main Chain: The main chain of toothpicks are all imported pure german iwis high-quality chain, made in germany.


●Improve the tooth row body strength, reduce the noise, movable tooth, tooth fixation to make improvement, suitable for a mouth or mouth work.

●Improve the side lay strength, the service life of wearing parts are fully extended and security.

●Enhance the feeding speed change mechanism, make the paper more accurate positioning, can guarantee the processing of thick paper, and is more suitable for tissue paper.

●The redesigned steel plate frame, the rack structure, lock frame plus limiting device, so it is more conducive to processing, handling more convenient.

●The front lay to adjust the bevel gear transmission mode. Position the side on the operation surface for fixed side location, and commonly used operator side pull lay to adapt. A movable side positioning device is on the drive surface side, using the guide column, which is very favorable on the accuracy of the side positioning.

●The stamping part adopts the high performance motion controller, centralized control. Jump smoothly and accurately

Specifications

ManufacturerJiguo
ModelTMY-800H
ConditionNew
Max. Paper Size810×610mm
Min. Paper Size320×230mm
Max. Diecutting Size790×590mm
Max. Stamping Range750×540mm
Max. Diecutting Speed7500s/h
Max. Stamping Speed6000s/h
Max. Feeding Pile Heigh1400mm
Max. Delivery Pile Height1200mm
Sheet Thickness纸板 (Cardboard):0.1-1.5mm 瓦楞纸 (Corrugated board):≤4mm
Die-cutting Precision±0.1mm
Stamping Tempreture0~200℃
Heating Plate Zone Number12
NO.of Foil Rollers3纵2横
Max. Length1200 ~ 1500m
Max. Pressure250T
Total Weight12.5T
Heating Plate Zone Power26kw
Total Power48kw
Overall Dimension6400×3830×2200mm
Vertical foil stamping section performance specification: Max. foil width750mm
Vertical foil stamping section performance specification: Min. foil width25mm
Vertical foil stamping section performance specification: Max. length of pull foil600mm
Vertical foil stamping section performance specification: Max. pull foil roll diameterφ200mm
Horizontal foil stamping section performance specification: Max. foil width540mm
Horizontal foil stamping section performance specification: Min. foil width25mm
Horizontal foil stamping section performance specification: Max. length of pull foil800mm
Horizontal stamping section performance specification: Max. pull foil roll diameterφ220mm
Air Requirements(Buyer provide)0.8Mpa, > 0.36m3 /min